Manual pumps
STATIONARY MANUAL PUMP series of "NP"
| NP 75 N | NP 75, NP 90 | NP 75 L |
 |
 |
 |
| » more | » more | » more |
| NOSTALGIC | NP 75 T | NP 75 N-TV |
 |
 |
 |
| » more | » more | » more |
STAND FOR SERIE NP
 |
 |
| » more | » more |
↑ Top
STATIONARY MANUAL PUMP "STANDARD" TYPE
| Working cylinder | |
 |
 |
| » more | » more |
Stationary Manual Pumps Standard Type with a tall outflow stand are intended for pumping of water containing no artificial additives, not exceeding 40 degrees C. The stands may be used to be attached to set-up piping to depths of 4 to 30 meters. The working cylinder type is given by the depth of the well.
KLINE AND BUCKLE DRAINAGE "STANDARD"
| 
|
MANUAL BUCKET PUMP "LILA 75"
The bucket pump LILA 75 of two cylinders may be installed in a limited space and used for free outflow or delivery of clean water not exceeding 40 oC. The pump consists of two cylinders of 75 mm diameter driven by an adjustable lever. The flexible construction of the pump allows wide range of applications.
» more
MANUAL MEMBRANE PUMP
The membrane pump is determined first of all for pumping of heavy soiled liquids (for sewerage wells, waste wells, etc.). It is unconditionally necessary to install the pump into vertical position.
» more
SLIDING-VANE PUMP
These pumps with rotary piston movement are produced in several types and sizes,
which makes possible to use them for pumping of almost all kinds of liquids (water, oil, petrol, etc.).
Delivered amount of liquid depends on the pump size from 10 to 140 litres at 110 to 56 strokes per minute.
The connecting thread is from G 3/8" to G 2" on both suction side and delivery side too, the mass is from 3 to 30 kg.
The maximum suction lift is 7 m for all pump sizes, the maximum delivery head is 20 m. » more
SPRAYS PU-K
Spray PU-K is for irrigation of agricultural land, gardens, maintenance of sports fields, dumps spraying wood, coal, etc. It is suitable only for spraying with clean water. Available in three sizes to spray the required length and intensity of rainfall. Spray PU-K1 comes with a tripod, which allows a good handling move. Mouthpiece is equipped with hose connection DN 1 1 / 4 "or DN 1 1 / 2". PU-K 2 and 3 is intended primarily as part of an ensemble of sets of irrigating farmland. more
SPRAY REVOLTIN
Rotating circular sprayer is designed for irrigation of small gardens clean water without mechanical impurities. Is a portable sprayer. It consists of a folding tripod, nozzle and a rotating impeller blades to nasunutého hřídelce the spring. Gadgets irrigates a circular area, whose diameter is given nozzle size and water pressure. Supplied with union nut and connecting sleeve for hose DN 19 or DN 25 (3 / 4 "or 1"). more
SUCTION BASKETS
| KULI | PIRAT | SK-321 |
 |
 |
 |
| » more | » more | » more |
| SKP |
 |
| » more |
DRIVING BITS
Driving bits are used with manual pumps and low stands of the NP series for bored wells in soft water-bearing layers. They serve as well as mechanical filters. » more
Hose clamps HERKULES
- plastic clips average 28 and 32 mm
- aluminum clamp diameter 40 and 65 mm
Spare parts for pumps series of NP and LILA 75
 |
 |
 |
| LILA head | LILA lever | LILA bottom |
 |
 |
 |
| NP discharge | NP lever | NP plate |
 |
 |
 |
| NP body | Pistons to pump | NP flap with a burden |
Spare parts for other pumps and suction baskets
 |
 |
 |
| Seal Tta 2" | Booster slug | Back-pressure valve |
 |
 |
 |
| Body of stand PUK 1 | Bayonet joint | Rubber balls for suction baskets KULI |
 |
 |
 |
| Valve to suction baskets PIRÁT | Foots REVOLTIN | Seal for suction baskets |